Category archive: Passive
Isolator+PCB Hybrid
The Isolator Polarization Beam Combiner/Splitter hybrid is a compact device which provides both polarization beam combining and optical isolation in one integrated component.
1×2 Optical switch
Miniature1x2Single-Mode OptomechanicalSwitch Smallsize -Lowinsertionloss -Widewavelengthrange -Latchornon-latchingoptions
1064nm FP Light Source
1064nm FP light source High stable output power Narrow spectrum ,single longitudinal mode output
MxN Optical Switch
MxN Optical Switch,2X8 Optical Switch, 2X10 Optical Switch, 2×16 Optical Switch, 2×32 Optical Switch,2×64 Optical Switch,etc, is a kind of device, with the ability of optical route switch. In optic fiber transmission system, it is used for optical route controlling, LAN, light source / detector changing, and protecting the change of Ethernet etc. In optical…
mems_ 4×4 & 8x8_optical_switch
Non-blocking Low insertion loss Fast switching time Reliable UART, I2C/SMBus and USB interfaces Custom networks available on request Demo-board with Ethernet interface available on request
Bypass Optical Switch
2×2 Bypass Optical Switch, which is famous for its high performance, low insertion loss and compact dimension : (L)27.0×(W)12.6×(H)8.0, It is an ideal Component for OADM，OXC，system monitor and protection. With compact package, it can be easy to integrate into a high density optical communication system.
1×2 Optical Switch
SM & MM 1×2 Fiber Optical Switch,which is famous for its high performance, low insertion loss and compact dimension :(L) 22.5×(W) 11.8×(H) 10.2. It is an ideal Component for OADM，OXC，system monitoring and protection. With compact package, it can be easy to integrate into a high density optical communication system.
1x1_1x2_PM_fiber_optical_switch
Operation wavelengths 1310/1550nm +/- 30nm Epoxy-Free Optical Path High Extinction Ratio Low Insertion Loss High Channel Isolation Highly Stability and Reliability Fiber Type- Panda Polarization-Maintaining Fiber
MPO_Connector
MPO/MTP fiber connector product families provide two categories as follows: 1) MPO/ MTP connector assembled to Ribbon/Round cable or bare ribbon. Connectors with push-pull latching Mechanisms are coupled via an adapter. MTP has an extra feature over MPO with a removable housing for re-polishing. 2) MT ferrule with fiber ribbon. MT ferrules are coupled using…
High Band Isolation WDM 1310/1550
Thin film filter (TFF) based Ultra-Wide, Ultra High Isolation band WDM provides greatly improved isolation (>45 dB) and greater operational bandwidth (1310/1550) than typical WDM couplers while providing optimal performance. The TFF based WDM has the same ø5.5 x 40 mm cylindrical package as conventional 3-port devices, saving on board space. http://www.mako.co.il/